TM 5-3805-254-34
6-16.
INPUT SHAFT AND FORWARD CLUTCH REPLACEMENT (Con’t).
b.
INSTALLATION
1. Apply thin coat of grease to surface of new seal rings
(1 and 3), bearing races (2 and 6), roller bearing (7),
and bearing ring (8).
2. Install bearing ring (8), flat side first, roller bearing (7),
and bearing race (6) to forward clutch hub (5).
3. Install input shaft (10) and forward clutch housing (4)
as an assembly into transmission housing (9).
4. Install two seal rings (3) on input shaft (10).
5. Install bearing race (2) over input shaft (10) and onto
hub of forward clutch housing (4).
6. Install seal ring (1) to front of input shaft (10).
FOLLOW-ON TASKS:
•
Install oil pump, front support, and converter housing (see paragraph 6-15).
TA703815
6-95
