TM 5-3805-254-34
9-5.
REAR-REAR DIFFERENTIAL MAINTENANCE (Con’t).
15.
Press on head of bolt (12) to release spring pressure against nut (15) and remove nut and washer (13).
16.
Slowly release pressure and allow assembly to separate until spring pressure is fully released.
17.
Remove bolt (12), washer (13), two side gears (22), springs (23), spring retainers (24), and drive gears (25) from
spider (26).
c.
THRU SHAFT REMOVAL AND DISASSEMBLY
1.
Remove six screws (27), lockwashers (28),
cover (29), and gasket (30) from differential
carrier (2). Discard gasket and lockwashers.
TA703974
9-43
