TM 5-3805-254-34
9-5.
REAR-REAR DIFFERENTIAL MA
3.
Remove eight bolts (57), lockwashers (56), c
(54), and gasket (55) from differential carrier
Discard lockwashers and gasket.
NOTE
Bearings
and
bearing
races
will
remain Inside bearing housing during
step 4. These will be removed In
subparagraph e only if damaged.
4.
Remove bearing housing (59) and shims (58)
from differential carrier (2). Attach shims to bear
housing to ensure that same number are install
5.
Tap cross-shaft (60) and ring gear set (61)
toward thru shaft chamber of differential carrier
(2).
6.
Install two cross-shaft removal spacers between
back of ring gear set (61) and inner of differential
carrier (2).
7.
Press cross-shaft (60) from differential carrier
TA703977
9-46
