TM 5-3805-254-34
12-3. RIGHT POWER STEERING GEAR REPAIR (Con’t). - -m ’ V
3.
Remove two capscrews (10) and lockwashers (9) from gear retaining nut (8). Discard lockwashers.
4.
Remove gear retaining nut (8) from output shaft (6) by rotating counterclockwise.
NOTE
Note position of alinement mark on center tooth of piston and gear for assembly.
5.
Remove output shaft (6) and gear (7) assembly from gear housing (1).
NOTE
Note position of alinement mark on output shaft and gear for assembly.
6.
Press gear (7) from output shaft (6).
7.
Make alinement marks on cylinder head (12), and gear housing (1) for assembly.
8.
Remove ten screws (13), lockwashers (14), cylinder head (12), and gasket (11) from gear housing (1). Discard
lockwashers and gasket.
9.
Repeat step 8 for other cylinder head (12).
TA704027
12-16
