TM 5-3805-254-34
12-3. RIGHT POWER STEERING GEAR REPAIR (Con’t).
2.
Install spring (20), ball (21), and valve seats (22)
to each plug (18).
NOTE
Ensure that plug is Installed until flush with end of piston, then rotate plug until locking
pin can be Installed through piston and plug. Ensure that plug and locking pin are flush
3.
Install plug (18) and locking pin (19) in piston
(15).
NOTE
Piston rings that have a taper on one side or are marked TOP are Installed with taper or
marking facing outward toward end of piston. Piston rings not tapered or marked may be
Installed in either direction.
4.
Install two piston rings (16) on piston (15).
5.
Install new packing assembly (17) in gear
housing (1).
6.
Coat piston (15) and piston rings (16) with oil,
and install piston in gear housing (1) using piston
ring compressor.
TA704030
12-19
