TM 5-3805-254-34
12-3. RIGHT POWER STEERING GEAR REPAIR (Con’t).
b.
CLEANING AND INSPECTION I
WARNING
Dry cleaning solvent, PD680, Is toxic and flammable. Always wear protective goggles and
gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes,
and DO NOT breathe vapors. DO NOT use near open flame or excessive heat. The
solvent's flash point Is 100°F1380F (38°C59°C). If you become dizzy while using cleaning
solvent, Immediately get fresh air and medical help. If solvent contacts eyes, Immediately
wash your eyes and get medical aid.
1.
Clean metal parts with dry cleaning solvent.
2.
Inspect metal parts for cracks, breaks, corrosion, or other damage. Replace damaged parts.
3.
Inspect piston for nicks or burrs. Remove nicks or burrs with fine stone.
4.
Inspect piston components for damage. If rings, pins, plugs, seats, or springs are damaged, replace piston.
NOTE
Note position of bushing In gear housing and housing cover for Installation.
5.
Inspect bushing (23) in gear housing (1) and bushing (24) in housing cover (3) for wear or damage. Remove
bushing (23 or 24) using puller if worn or damaged. Discard bushings.
c.
ASSEMBLY
NOTE
•
Perform step 1 if bushing In gear housing or housing cover was removed.
•
During assembly, aline all alinement marks made during disassembly.
1. Install bushing (23 or 24) In gear housing (1) or housing cover (3).
TA704029
12-18
