TM 5-3805-254-34
12-7. STEERING HYDRAULIC PUMP MAINTENANCE.
This Task Covers:
a.
Removal
d.
Assembly
b.
Disassembly
e.
Installation
c.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Hydraulic pump hoses and fittings removed (see
•
Lubricating oil (Item 13, Appendix B)
TM 5-3805-254-20).
•
Petrolatum (Item 16, Appendix B)
•
Dry cleaning solvent (Item 23, Appendix B)
Tools/Test Equipment:
•
One gasket
•
General mechanic's tool kit
•
Two lockwashers
•
Field automotive shop set
•
Two repair kits
References:
•
TM 9-214
General Safety Instructions:
•
Dry cleaning solvent is flammable and must not be used near open flame. Use only in a well-ventilated area.
a.
REMOVAL
1. Remove two screws (5) and lockwashers (4) from hydraulic pump (3). Discard lockwashers.
2. Remove hydraulic pump (3), gasket (6), and coupling (2) from engine oil pump (1). Discard gasket.
TA704050
12-40
