TM 5-3805-254-34
12-6. STEERING COLUMN REPLACEMENT (Con’t).
5.
Position rubber boot (24) over end of drive shaft
(15) and install rubber boot and retainer (23) with
four screws (25) to firewall.
6.
Install steering column brace (22) to firewall with
two washers (21) and screws (20).
NOTE
Bottom-left hole of steering column bracket
is used when Installing turn signal switch.
7.
Install steering column bracket (14) to instrument
panel (19) with eight washers (17), three bolts
(18), and nuts (16).
TA704047
12-37
