TM 5-3805-254-34
12-6. STEERING COLUMN REPLACEMENT (Cont).
6.
Remove nut (1) and steering column flange (41)
from jacket tube (7).
7.
Remove lead and roller (3) from jacket tube (7).
8.
Remove spacer (45), seat (46), upper bearing
(47), and jacket tube (7) from drive shaft (15).
9.
Remove dust cap (50), spring (51), seat (49),
and bearing assembly (48) from drive shaft (15).
c.
CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, PD680, is toxic and flammable. Always wear protective goggles and
gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and clothes,
and DO NOT breathe vapors. DO NOT use near open flame or excessive heat. The
solvent's flash point Is 100°F1380F (380C590C). If you become dizzy while using cleaning
solvent, immediately get fresh air and medical help. If solvent contacts eyes, Immediately
wash your eyes and get medical aid.
1.
Clean metal parts with dry cleaning solvent.
2.
Inspect metal parts for cracks, breaks, and other damage. Replace if damaged.
3.
Clean plastic parts with detergent and water solution.
4.
Inspect plastic parts for cracks, breaks, and other damage. Replace if damaged.
TA704043
12-33