TM 5-3805-254-34
12-6. STEERING COLUMN REPLACEMENT (Con’t).
e.
INSTALLATION I
NOTE
Perform steps 1 through 4 to Install lower steering column components to vehicle.
1.
Install two yokes (29 and 32) on both ends of lower drive shaft (30) with two screws (26), slotted nuts (27), and
new cotter pins (28).
2.
Position lower drive shaft (30) to vehicle.
3.
Connect bottom yoke (29) to steering gear input shaft (31).
4.
Install screw (26) and slotted nut (27) to yoke (29). Torque nut to 35 lb.ft. (47 N.m) and install new cotter pin (28).
TA704046
12-36
