TM 5-3805-254-34
12-6. STEERING COLUMN REPLACEMENT (Con’t).
NOTE
Perform step 9 for upper and lower steering yokes.
9.
Remove cotter pin (28), slotted nut (27), and screw (26) from yoke (29). Discard cotter pin.
10.
Remove two yokes (29) from steering gear input shaft (31) and from drive shaft (15).
11.
Remove lower drive shaft (30) from vehicle.
12.
Repeat step 9 for two yokes.(32) on lower drive shaft (30).
TA704041
12-31
