TM 5-3805-254-34
12-6. STEERING COLUMN REPLACEMENT (Cont)
b.
DISASSEMBLY
NOTE
Perform steps 1 through 3 for each universal
Joint.
1.
Remove
and
discard
two
snaprings
(33),
bearings (34), and seals (35) from yoke (32).
2.
Remove and discard lubrication fitting (37) from
universal (36).
3.
Remove
and
discard
two
snaprings
(33),
bearings (34), seals (35), and universal (36)
from yoke (29).
4.
Remove dust cap (38), seal washer (39), and seal (40) from drive shaft (15). Discard seal washer and seal.
5.
Remove two locknuts (42), washers (43), and clamp bolts (44) from steering column flange (41) to disconnect lead
and roller (3). Discard locknuts.
TA704042
12-32