TM 5-3805-254-34
12-6. STEERING COLUMN REPLACEMENT (Con’t).
5.
Connect lead and roller (3) to steering column flange (41) with two clamp bolts (44), washers (43), and new
locknuts (42).
6.
Install new seal (40), new seal washer (39), and dust cap (38) to drive shaft (15).
7.
Install lubrication fitting (37) to universal (36).
NOTE
Perform steps 8 and 9 for each of two
universal joints.
8.
Install new universal (36), two new seals (35),
new bearings (34), and new snaprings (33) to
yoke (32).
9.
Install new universal (36), two new seals (35),
new bearings (34), and new snaprings (33) to
yoke (29).
10.
Lubricate
lubrication
fittings
(37)
(see
LO
5380525412).
TA704045
12-35
