TM 5-3805-254-34
16-5.
POWER TAKE-OFF CONTROL VALVE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
* Power take-off indicator lamp removed (see TM 5-
• Two lockwashers
3805-254-20).
Tools/Test Equipment:
• General mechanic's tool kit
a.
REMOVAL
1.
Disconnect air line (4) from adapter (3).
2.
Disconnect air line (1) from elbow (2).
3.
Remove two nuts (10), lockwashers (11), washers (12), screws (6), and bracket (8) from dash panel (7). Discard
lockwashers.
4.
Remove two screws (9) and control valve (5) from bracket (8).
5.
Remove adapter (3) from control valve (5).
6.
Remove elbow (2) from control valve (5).
7.
Remove plug (13) from control valve (5).
TA704229
16-18
