TM 5-3805-254-34
17-1.
DUMP BODY HYDRAULIC LIFT CYLINDER REPLACEMENT (Cont).
a.
REMOVAL
1.
Attach overhead lifting device to hydraulic cylinder (1).
2.
Raise hydraulic cylinder (1) just enough to take weight of hydraulic cylinder off cylinder base pin (4).
WARNING
Ensure that all personnel are clear of hydraulic cylinder before raising to prevent Injury to
personnel.
3.
Remove two cotter pins (3) and cylinder base pin (4) to separate hydraulic cylinder (1) from subframe (5). Discard
cotter pins.
4.
Raise hydraulic cylinder (1) to clear subframe (5).
5.
Move hydraulic cylinder (1) to safe work area and place on secure supports. Remove overhead lifting device.
TA704231
17-2