TM 5-3805-254-34
16-4.
POWER TAKE-OFF OUTPUT SHAFT REPLACEMENT (Con’t).
3.
Disconnect universal joint (5) from power take-off output shaft (6).
4.
Remove other setscrew (4) and universal joint (2) with shaft (3) from hydraulic pump (1).
b.
INSTALLATION
1.
Install universal joint (2) with shaft (3) to hydraulic pump (1) and install setscrew (4).
2.
Apply thin coat of grease to splines of shaft (3).
3.
Install universal joint (5) on power take-off output shaft (6) as marked.
4.
Install other setscrew (4).
FOLLOW-ON TASKS:
• Install floorboards and inserts (see paragraph 15-3).
16-17
