TM 5-3805-264-13&P
0031
NOTE
Wires should be tagged before disconnecting (WP 0072).
Note location of tiedown straps and routing of wiring harness prior to removal to
aid in installation.
REMOVAL
1.
At beacon warning light, disconnect two wiring harness connectors from beacon warning light connectors.
2.
Remove wiring harness (Figure 1, Item 3) from cab shield grommet (Figure 1, Item 1).
3.
Remove nuts (Figure 1, Item 4) and clamps (Figure 1, Item 5) securing wiring harness (Figure 1, Item 3) to
welded studs (Figure 1, Item 6) on cab shield (Figure 1, Item 2) and dump body (Figure 1, Item 9).
4.
Remove wiring harness (Figure 1, Item 3) from grommet (Figure 1, Item 7) at front passenger's side of dump
body (Figure 1, Item 9).
5.
Repeat Step 3 to release wiring harness (Figure 1, Item 3) from welded studs on inner surface of
passenger's side dump body frame rail (Figure 1, Item 8).
Figure 1. Beacon Warning Light Hardware Removal.
03/15/2011Rel(1.10)root(maintwp)wpno(M1001226413)
