TM 5-3805-264-13&P
0036
INSTALLATION
WARNING
Use extreme care when handling heavy parts. Lifting cables, chains, hooks, and slings
must be in good condition and of suitable capacity. Keep clear of parts supported only by
lifting device. Failure to comply may result in personnel injury, death, and/or damage to
equipment.
1.
Attach slings to cylinder support frame (Figure 2, Item 2) and attach slings to lifting device. Take up slack in
slings with lift.
2.
Lift cylinder support frame (Figure 2, Item 2) and position on vehicle chassis (Figure 2, Item 5).
3.
Install passenger's side angle bracket (Figure 2, Item 6) and driver's side angle bracket (Figure 2, Item 3) on
vehicle chassis (Figure 2, Item 5) and cylinder support frame (Figure 2, Item 2) with 24 screws
(Figure 2, Item 1) and new locknuts (Figure 2, Item 4).
4.
Torque locknuts (Figure 2, Item 4) to 200 lb-ft (271 Nm).
Figure 2. Cylinder Support Frame Installation.
END OF TASK
03/15/2011Rel(1.10)root(maintwp)wpno(M1004626413)
