TM 5-3805-264-14&P
4-38. BODY UP SWITCH REPLACEMENT (Cont).
a.
REMOVAL
NOTE
Wires should be tagged before disconnecting (paragraph 4-17).
Disconnect two wiring harness leads (2) from body up switch (1).
NOTE
To ensure proper installation, note switch lever position.
Remove two screws (4) and body up switch (1) from cylinder support frame (3).
1.
2.
b. INSTALLATION
1.
Install body up switch (1) on cylinder support frame (3) with two screws (4).
2.
Connect two wiring harness leads (2) to body up switch (1).
FOLLOW-ON TASKS:
Connect batteries (TM 9-2320-363-20).
Remove body props and lower dump body (paragraph 2-15).
Check operation of body up switch (paragraph 2-1).
4-34