TM 5-3805-264-14&P
4-39.
TRANSPORT LOCK SWITCH REPLACEMENT.
This task covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Dump body raised and supported on body props
Tie wraps (as required)
(paragraph 2-15).
Batteries disconnected (TM 9-2320-363-20).
Tools/Test Equipment:
General mechanics tool kit (Item 8, Appendix I)
General Safety instructions:
NEVER work under a raised dump body unless it
is secured in the raised position with body props
and dump body is EMPTY.
NEVER work under a raised dump body unless it is secured in the raised position
with body props and dump body is EMPTY. Failure to follow this warning may result
in death or injury to personnel.
a.
REMOVAL
NOTE
Note location of tie wraps prior to removal to aid in installation.
1.
Disconnect transport lock switch connector (2) from wiring harness connector (1).
2.
Remove button (7), nut (6), and transport lock switch (3) from chassis mount (5).
4-35