TM 5-3805-264-14&P
4-44.
BODY UP AND TRANSPORT LOCK SWITCHES WIRING HARNESS
MAINTENANCE.
This task covers.
a. Removal
b. Repair
c. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Dump body raised and supported on body props
• Marker tags (Item 19, Appendix F)
(paragraph 2-15).
• Tie wraps
• Batteries disconnected (TM 9-2320-363-20).
General Safety Instructions:
Tools/Test Equipment:
• NEVER work under a raised dump body unless it
• General mechanic’s tool kit (item 8, Appendix I)
is secured in the raised position with body props
and dump body is EMPTY.
NEVER work under a raised dump body unless it is secured in the raised position
with body props and dump body is EMPTY. Failure to follow this warning may result
in death or injury to personnel.
a.
REMOVAL
1.
2.
NOTE
•
Wires should be tagged before disconnecting (paragraph 4-17).
•
Note location of tie wraps and routing of wiring harness prior to removal to aid
in installation.
Remove tie wraps and discard.
Disconnect transport lock switch connector (1) from wiring harness connector (2).
4-47
