TM 5-3805-264-14&P
4-45.
BEACON WARNING LIGHT WIRING HARNESS MAINTENANCE.
This task covers:
a. Removal
c. Installation
b. Repair
Initial Setup:
Equipment Conditions:
Materials/Parts (Con’t):
• Dump body raised and supported on body props
(paragraph 2-15).
• Batteries disconnected (TM 9-2320-363-20).
• Locknuts (as required)
• Tie wraps (as required)
Tools/Test Equipment:
General Safety Instructions:
• General mechanic’s tool kit (Item 8, Appendix I)
Materials/Parts:
• Marker tags (Item 19, Appendix F)
• NEVER work under a raised dump body unless it
is secured in the raised position with body props
and dump body is EMPTY.
NEVER work under a raised dump body unless it is secured in the raised position
with body props and dump body is EMPTY. Failure to follow this warning may result
in death or injury to personnel.
a.
REMOVAL
NOTE
•
Wires should be tagged before disconnecting (paragraph 4-17).
•
Note location of tie wraps and routing of wiring harness prior to removal to aid
in installation.
1.
At beacon warning light, disconnect two wiring harness connectors from beacon warning light connectors.
4-49
