TM 5-3805-264-14&P
4-46.
LIGHTS WIRING HARNESS MAINTENANCE (Cont).
c. INSTALLATION
1.
Position wiring harness (4) between points of connection, routing it along channels and openings in dump
body (1).
2.
3.
4.
5.
Connect wiring harness connector (5) to chassis wiring harness connector (6).
Connect wiring harness leads (2) to three marker clearance lights (3) at rear hinge light bracket (7).
Connect wiring harness to each taillight and install taillights (paragraph 4-40).
Connect wiring harness to marker clearance light on each side of dump body and install lights (paragraph
4-41).
6.
Install two wiring harness terminal leads to backup alarm (TM 9-2320-363-20).
7.
Install new tie wraps.
FOLLOW-ON TASKS:
Connect batteries (TM 9-2320-363-20).
Remove body props and lower dump body (paragraph 2-15).
Check operation of dump body lights and backup alarm (TM 9-2320-363-1 0).
4-53