TM 5-3805-264-14&P
4-47.
TRUCK-TO-MCS TAILGATE WIRING HARNESS MAINTENANCE (M917A1 W/
MCS).
This task covers:
a. Removal
b. Repair
c. Installation
Initial Setup.
Equipment Conditions:
Materials/Parts:
• Dump body raised and supported on body props
(paragraph 2-15).
• Marker tags (Item 19, Appendix F)
• Two self-locking nuts
• Tie wraps (as required)
• Batteries disconnected (TM 9-2320-363-20).
General Safety Instructions:
Tools/Test Equipment:
• General mechanic’s tool kit (Item 8, Appendix I)
• NEVER work under a raised dump body unless it
is secured in the raised position with body props
and dump body is EMPTY.
NEVER work under a raised dump body unless it is secured in the raised position
with body props and dump body is EMPTY. Failure to follow this warning may result
in death or injury to personnel.
a.
REMOVAL
NOTE
• Wires should be tagged before disconnecting (paragraph 4-17).
• Note location of tie wraps and routing of wiring harness prior to removal to aid
in installation.
1.
Disconnect MCS tailgate wiring harness connector (3) from truck-to-MCS tailgate wiring harness recepta-
cle (2) at left dump body pillar (1).
4-54
