TM 5-3805-264-14&P
4-45.
BEACON WARNING LIGHT WIRING HARNESS MAINTENANCE (Con’t).
2.
Remove wiring harness (3) from cab shield grommet (1).
3.
Remove locknuts (4) and clamps (5) securing wiring harness (3) to welded studs (6) on cab shield (2) and
dump body (9). Discard locknuts.
4.
5.
Remove wiring harness (3) from grommet (7) at front right side of dump body (9).
Repeat step 3 to release wiring harness (3) from welded studs on inner surface of right side dump body
frame rail (8). Discard locknuts.
6.
Disconnect wiring harness connector (11) from chassis wiring harness connector (10).
7.
Remove wiring harness (3)
4-50
