TM 5-3805-264-14&P
4-61.
BODY PROP REPLACEMENT.
This task covers
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
l General mechanic’s tool kit (Item 8, Appendix I)
Materials/Parts:
l One spring pin
l Three lockwashers
1.
2.
3.
Remove spring pin (5) and body prop (4) from pivot bracket (3). Discard spring pin.
Remove two nuts (6), lockwashers (7) screws (2) and pivot bracket (3) from frame (11). Discard lock-
washers.
Remove nut (8), lockwasher (9) screw (1), and support bracket (10) from frame (11). Discard lockwasher.
1.
Install support bracket (10) to frame (11) with screw (1) new lockwasher (9) and nut (8).
2.
Install pivot bracket (3) to frame (11) with two screws (2), new lockwashers (7), and nuts (6).
3.
With body prop (4) positioned above support bracket (10), install body prop to pivot bracket (3) with new
spring pin (5).
FOLLOW-ON TASKS:
Lubricate body prop (Chapter 3, Section I).
4-93
