TM 5-3805-264-14&P
4-63.
MUD FLAP REPLACEMENT (Con’t).
3.
Remove two locknuts (13) screws (11),
anchor plate (12), and mounting plate (10)
from mud flap (7). Discard locknuts.
b.
INSTALLATION
1.
2.
3.
Install mounting plate (10) and anchor plate (12) to mud flap (7) with two screws (11) and new locknuts
(13).
Install mounting plate (4) to weldment (1) on dump body with shaft (9) two washers (3), and new spring
pins (2) through shaft.
Install mud flap (7) and plate (5) to mounting plate (4) with four screws (6) and new locknuts (8).
4-98
