TM 5-3805-264-14&P
4-64.
CARGO COVER REPLACEMENT (Con’t).
3.
4.
5.
Uncrimp and remove centering springs (7) from eye bolts (8) and from grommets in cargo cover (3).
Remove two locknuts (5) and eye bolts (8) from cross arm (6) and connecting arms (4). Discard locknuts.
Remove cross arm (6) from connecting arms (4). Slide cross arm from cargo cover (3). Remove cargo
cover.
1.
Install cross arm (6) through pocket in cargo cover (3).
2.
Install cross arm (6) into each connecting arm (4) and secure with two eye bolts (8) and new locknuts (5).
3.
Attach two centering springs (7) to eye bolts (8) and to grommets in cargo cover (3). Crimp spring ends.
4.
5.
Pull cargo cover (3) to roll-up bar (1). Pass
cover UNDER roll-up bar and secure to roll-up
bar with six screws (2).
Fully retract cargo cover (3) (paragraph 2-14).
4-100
