TM 5-3805-264-14&P
4-65.
CARGO COVER CRANK ASSEMBLY MAINTENANCE (Con’t).
1.
2.
3.
4.
5.
6.
7.
8.
Install key (11) and brake drum (8) on crank shaft (16).
Position ratchet (3) on brake drum (8) and secure with three screws (2).
Install chain sprocket (1) on crank shaft (16) with retaining ring (25).
Attach brake band (7) to control handle (18) with screw (17) and new locknut (20).
Position brake band (7) over brake drum (8). Position control handle (18) on pivot shaft (15)
Install brake pawl (4) on crank assembly baseplate (14) with retaining ring (21).
Install brake pawl spring (23) between control handle (18) and brake pawl (4). Secure brake pawl spring to
pawl with new pushnut (24). Secure to control handle with retaining ring (19).
Install brake band spring (6) between brake band (7) and crank assembly baseplate stud (IO). Secure with
new pushnut (5).
1.
2.
Install crank assembly baseplate (14) on dump body with two screws (9) washers (12), and nuts (13). Do
not tighten screws.
Install chain to sprockets and tighten screws (9) (paragraph 4-66).
FOLLOW-ON TASKS:
Check operation of cargo cover (paragraph 2-14).
Fully retract cargo cover (paragraph 2-14).
4-103
