TM 5-3805-264-14&P
4-67.
CARGO COVER SUPPORT FRAME AND ROLL-UP BAR REPLACEMENT (Con’t).
5.
6.
7.
Install spring assembly (7) on dump body and through welded shaft support bar and tube (1) with two
screws (8), new lockwashers (9), and nuts (10).
Connect swing arm (5) and connecting arm (3) with screw (2) and new locknut (4).
Install swing arm (5) on spring assembly shaft (6). Install new spring pin (11) through shaft.
FOLLOW - ON TASKS;
Install cargo cover chain (paragraph 4-66).
Install cargo cover (paragraph 4-64).
Check operation of cargo cover (paragraph 2-14).
Fully retract cargo cover (paragraph 2-14).
4-110
