TM 5-3805-264-14&P
4-70.
HYDRAULIC CONTROL LEVER REPLACEMENT (Con’t).
NOTE
5.
6.
7.
To ease installation, note mounting position of cable pivot pins and hold-down
clamps prior to disconnecting cables.
Place transmission selector lever in D (Drive) position (TM 9-2320-363-10).
Tag transmission shift cable (7).
Remove two nuts (12), lockwashers (11), screws (8), clamp (10), and spacer (9) from bracket (13). Discard
lockwashers.
8.
Remove retaining pin (5) from pivot pin (6) and pivot pin from bracket (14)
4-115
