TM 5-3805-264-14&P
4-70.
HYDRAULIC CONTROL LEVER REPLACEMENT (Con’t).
7.
8.
Install transfer case control cable pivot pin (16) in bracket (24) and secure with retaining pin (15).
Install spacer (19), cable (17) clamp (20), two screws (18), new lockwashers (21), and nuts (22) to bracket
(23).
9.
10.
With transmission selector lever in D (Drive) position, install transmission control cable pivot pin (6) in
bracket (14) and secure with retaining pin (5).
Install spacer (9) cable (7) clamp (10), two screws (8), new lockwashers (11), and nuts (12) to bracket
(13).
4-120
