TM 5-3805-264-14&P
4-70.
HYDRAULIC CONTROL LEVER REPLACEMENT (Con’t).
b.
INSTALLATION
1.
2.
3.
4.
5.
6.
Install hydraulic control lever (37) to transfer case selector lever (38) with two bolts (36), flatwashers (40),
and nuts (39).
Position handle assemblies (35) on shift tower (1).
To keep shift tower (1) rigid, install two top screws (2) on front and rear of shift tower.
With hydraulic control lever in DOWN position, install hydraulic control cable pivot pin (25) in bracket (33)
and secure with retaining pin (26).
Install spacer (31), cable (27) clamp (30), two screws (32) new lockwashers (29), and nuts (28) to bracket
(34).
Place hydraulic control lever in N (Neutral) position (paragraph 2-1)
4-119
