TM 5-3805-254-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Move red test lead to blue wire (11) on wire connector (2) and move black test lead to 53 wire
(12) on wire connector (3). Check for 0 ohms on multimeter. Disconnect test leads.
a.
If multimeter reads no continuity on 51 wire (8), 52 wire (10), or 53 wire (12), wire
connectors (2 and 3) must be replaced. Notify Direct Support Maintenance.
b.
If multimeter reads 0 ohms on 51 wire (8), 52 wire (10), and 53 wire (12), install
center instrument panel (page 2-424) and connect batteries (page 2-424).
2-187
