TM 5-3805-254-20-2
ALCOHOL EVAPORATOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Do not smoke or allow open flames or sparks into areas where alcohol is being used. Failure to observe
this precaution could cause death or serious injury to personnel.
Care must be taken when taking off canister to prevent spilling alcohol. Injury to personnel could result.
1.
Housing (1)
Cannister (2)
Unscrew and take off.
NOTE
For more information on how to tag parts, go to General Maintenance Instructions (page 2-424).
2.
90-degree elbow (3)
Vacuum hose (4)
a.
Tag.
b.
Using 9/16-inch open-end wrench, un-
screw and take off.
3.
90-degree elbow (5)
Airhose (6)
a.
Tag.
b.
Using 9/16-inch open-end wrench, un-
screw and take off.
4.
Bracket (7)
Three screws (8),
a.
Using 7/16-inch open-end and 716-
three lockwashers
inch box-end wrenches, unscrew and
(9), and three
take off.
nuts (10)
b.
Get rid of lockwashers.
5.
Housing (1)
Take off.
5.1.
Two screws (10.1),
a.
Using 1/2-inch open-end and 1/2-inch box-
two lockwashers (10.2),
end wrenches, unscrew, and take off.
and two nuts (10.3)
b.
Get rid of lockwashers.
5.2. Mounting bracket (10.4)
Bracket (7)
Take off.
DISASSEMBLY
6.
Housing (1)
90-degree elbow (3)
Using 1/2-inch open-end wrench, unscrew
and take out.
7.
Fitting (11)
90-degree elbow (5)
Using 5/8-inch and 1/2-inch open-end
wrenches, unscrew and take out.
Change 1 2-996
