TM 5-3805-254-20-2
ALCOHOL EVAPORATOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
21.1. Mounting bracket (7.1)
Bracket (7.2)
Put in place.
21.2.
Two screws (7.3),
Screw on and tighten using 1/2-inch box-end
two new lockwashers
and 1/2-inch open-end wrenches.
(7.4), and two nuts (7.5)
22.
Bracket (8)
Housing (1)
Put in place.
23.
Three screws (9),
Screw on and tighten using 7116-inch box-
three new lock-
end and 7/16-inch open-end wrenches.
washers (10), and
three nuts (11)
24.
Housing (1)
90-degree elbow (3)
Wrap pipe threads with antiseizing tape.
25.
90-degree elbow (3)
Airhose (12)
Screw on and tighten using 9/16-inch open-
end wrench.
26.
Housing (1)
90-degree elbow (4)
Wrap pipe threads with antiseizing tape.
27.
90-degree elbow (4)
Vacuum hose (13)
Screw on and tighten using 9/16-inch open-
end wrench.
28.
Housing (1)
Cannister (14)
Screw on and hand tighten.
TA702137
TASK ENDS HERE
TA702137
Change 1 2-1001