TM 5-3805-254-20-2
AIR DRYER CARTRIDGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
Position new cartridge as shown in illustration.
31.
Air dryer (1)
New cartridge (2)
Screw in and tighten using 314-inch 1/2-
inch drive deep socket and ratchet handle.
32.
Head assembly (3)
New ring (4)
a.
Coat with lubricating oil.
b.
Put on up to lip (5).
NOTE
Position head assembly as shown in illustration.
33.
Air dryer (1)
Head assembly (3)
Put in.
34.
Ring (6)
a.
Push up head assembly (3).
b.
Put in ring.
c.
Release head assembly.
NOTE
Position three clips as shown in illustration.
35.
Head assembly (3)
Three clips (7)
Put into position.
36.
Three screws (8)
Screw in and tighten using 7/16-inch box-
and three new
end wrench.
lockwashers (9)
NOTE
For more information on antiseizing tape, go to General Maintenance Instructions (page 2-424).
37.
45-degree elbow (10)
Wrap pipe threads with antiseizing tape.
38.
45-degree elbow (10)
Governor line (11)
a.
Screw on and tighten using 518-inch
open-end wrench.
b.
Get rid of tag.
39.
Terminal (12)
Heater wire (13),
a.
Put on heater wire.
nut (14), and
b.
Screw on and tighten nut using 3/8-inch
boot (15)open-end wrench.
c.
Push boot over nut.
2-1020
