TM 5-3805-254-20-2
AIR DRYER CARTRIDGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
4.
Head assembly (3)
Three screws (8),
a.
Using 7/16-inch box-end wrench, un-
three lockwashers
screw and take off.
(9), and three
b.
Get rid of lockwashers.
clips (10)
CAUTION
Care must be taken not to strike heater wire terminal or 45-degree elbow.
5.
Air dryer (11)
Head assembly (3)
Using plastic-face hammer, strike gently to
push up.
6.
Retaining ring (12)
Using 3/8-inch flat-tip screwdriver, pry out
from notch.
7.
Head assembly (3)
Pull out.
8.
Ring (13)
a.
Take out.
b.
Get rid of.
9.
Cartridge screw (14)
Using 3/4-inch, 1/2-inch drive deep socket
and cartridge (15)
and ratchet handle, unscrew and lower
cartridge.
TA244344
2-1015
