TM 5-3805-254-20-2
AIR DRYER CARTRIDGE
This task covers:
a.
Removal (page 2-1014)
d.
Inspection/Replacement (page 2-1018)
b.
Disassembly (page 2-1016)
e.
Assembly (page 2-1019)
c.
Cleaning (page 2-1016)
f.
Installation (page 2-1020)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Gloves, safety
Lockwasher, check ball retaining screw
Goggles, safety
Lockwasher, head assembly (three required)
Hammer, plastic-face
Oil, lubricating (item 14, appendix C)
Handle, ratchet, 1/2-inch drive
Ring set
Screwdriver, cross-tip, number two
Rags, wiping (item 15, appendix C)
Screwdriver, flat-tip, 3/8-inch
Solvent, drycleaning (item 19, appendix C)
Socket, deep, 3/4-inch, 1/2-inch
Tags, marker (item 21, appendix C)
drive
Tape, antiseizing (item 22, appendix C)
Wrench, box-end, 7/16-inch
Valve, ball check
Wrench, box-end, 11/16-inch
Wrench, open-end, 3/8-inch
Personnel Required
Wrench, open-end, 518-inch
One
Materials/Parts
Equipment Condition
Cartridge, air dryer
Locknut, cartridge
Airbrake system drained (page 2-1034).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
For more information on how to tag parts, go to General Maintenance Instructions (page 2-424).
1.
45-degree elbow (1)
Governor line (2)
a.
Tag.
b.
Using 5/8inch open-end wrench, un-
screw and take off.
2.
Head assembly (3)
Boot (4)
Pull back.
3.
Terminal (5)
Nut (6) and heater
Using 3/8-inch open-end wrench, unscrew
wire (7)
and take off.
2-1014
