TM 5-3805-254-20-2
AIR DRYER CARTRIDGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY
CAUTION
Position cartridge with cartridge locknut facing up to prevent beads from spilling.
10.
Cartridge (1)
Cartridge locknut
a.
Using 3/4-inch 1/2-inch drive deep
(2) and cartridge
socket, ratchet handle, and 11/16-inch
screw (3)
box-end wrench, unscrew and take off
cartridge locknut.
b.
Get rid of cartridge locknut.
Do not take out cartridge screw.
11.
Plate (4), washer
Take out.
(5), and spring (6)
12.
Cartridge (1)
Get rid of.
13.
Plate (4)
Two rings (7)
a.
Take off.
b.
Get rid of.
14.
Screw (8), lock-
a.
Using number two cross-tip screw-
washer (9), and
driver, unscrew and take off.
clip (10)
b.
Get rid of lockwasher.
15.
Ball check
a.
Take out.
valve (11)
b.
Get rid of.
CLEANING
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective safety goggles and gloves and use
only in a well-ventilated area. Avoid contact with skin, eyes, and clothes and do not breathe vapors. Do
not use near open flame or excessive heat. The flashpoint for type #1 drycleaning solvent is 100°F (38°C)
and for type #2 is 138°F (59°C). If you become dizzy while using cleaning solvent, get fresh air
immediately, and get medical aid. If contact with eyes is made, flush your eyes with water and get medical
aid immediately.
2-1016
