TM 5-3805-254-20-2
AIR DRYER CARTRIDGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY
CAUTION
Position new cartridge with cartridge locknut facing up to prevent beads from spilling.
25.
Plate (3)
New ball check
a.
Drop in ball check valve.
valve (8) and
b.
Put retaining clip in position.
clip (9)
26.
Screw (10) and new
Screw in and tighten using number two
lockwasher (11)
cross-tip screwdriver.
27.
Two new rings (12)
a.
Coat with lubricating oil.
b.
Put into ring grooves (4).
28.
New cartridge (13)
Spring (5) and
Put in.
washer (14)
Position large diameter of spring
facing down.
NOTE
Hold cartridge screw from being pushed out when performing next step.
29.
Plate (3)
Put on.
30.
Cartridge screw (15)
New cartridge
Screw on and tighten using 3/4-inch 112-
locknut (16)
inch drive deep socket, ratchet handle, and
11/16-inch box-end wrench.
TA244347
2-1019
