TM 5-3805-254-20-2
REAR HUB AND BRAKEDRUM ASSEMBLY AND WHEEL BEARINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT - CONTINUED
25
Rear hub (1) and
a
Position rear hub on wood blocks with
brakedrum (2)
axle flange studs (3) facing down.
b
Position brakedrum on rear hub facing
up.
c
Aline hub stud holes.
26
Brakedrum (2)
Hub stud (4)
a
Put into hub stud hole.
b
Drive in using 3-pound cross-peen
hammer and brass driftpin punch.
Make sure hub stud is flush against
brakedrum.
27
Rear hub (1)
Inner bearing
a
Position rear hub on wood blocks with
cup (5)
axle flange studs (3) facing down.
b
Using puller, pull out.
c
Get rid of.
TA244450
2-1196