TM 5-3805-254-20-2
REAR HUB AND BRAKEDRUM ASSEMBLY AND WHEEL BEARINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective safety goggles and gloves and use
only in a well-ventilated area. Avoid contact with skin, eyes, and clothes and do not breathe vapors. Do not
use near open flame or excessive heat. The flashpoint for type #1 drycleaning solvent is 1000F (380C) and
for type #2 is 138°F (590C). If you become dizzy while using cleaning solvent, get fresh air immediately, and
get medical aid. If contact with eyes is made, flush your eyes with water and get medical aid immediately.
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-424).
14
Rear hub (1) and
a Clean outside, inside, and bearing cups
brakedrum (2)
using drycleaning solvent and cleaning
brush.
b Wipe clean using wiping rag.
15
Outer bearing (3)
a Clean using drycleaning solvent and
and inner
cleaning brush.
bearing (4)
b Wipe clean using wiping rag.
16
Spindle (5)
a Clean threads using drycleaning solvent
and cleaning brush.
b Clean bearing and seal surfaces using
drycleaning solvent and wiping rag.
c
Wipe clean using wiping rag.
INSPECTION/REPLACEMENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions
(page 2-424).
A blue color on metal parts indicates a dry overheated condition.
2-1192
