TM 5-3805-254-20-2
REAR HUB AND BRAKEDRUM ASSEMBLY AND WHEEL BEARINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
WARNING
Due to excessive weight, assistance will be needed to lift hub and breakdrum
assembly. Failure to observe this precaution could cause serious injury to
personnel.
NOTE
Steps 23 thru 26 are typical for all ten hub studs.
23
Brakedrum (2)
Position on wood blocks with hub studs
facing up.
WARNING
Safety goggles must be worn to prevent eye injury from flying metal chips.
24
Rear hub (1)
Hub stud (5)
Using 3-pound cross-peen hammer, drive
out.
NOTE
If brakedrum or rear hub is to be replaced, replace before performing step 25.
TA244449
2-1195