TM 5-3805-254-20-2
DUMP BODY CONTROL LEVER AND LINKAGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
33. Eye (1)
Cable (2)
Pull to rear and bend over.
34. Cable (2)
Clamp (3)
Put on.
35. Clamp (3)
Two new lockwashers
Screw on and tighten using 7/16-inch box-
(4) and two nuts (5)
end wrench.
36 Dump truck (6)
Dump body (7)
Lower (page 2-424).
37 Eye (8)
Cable (2)
Pull to rear.
38. Cable (2)
Clamp (9)
a. Put on.
b. Using 25-foot steel tape measure, ad-
just 1-inch (25.4 mm) to rear of eye.
39. Clamp (9)
Two new lockwashers
Screw on and tighten using 7/16-inch box-
(10) and two
end wrench.
nuts (11)
TA244571
2-1374
