TM 5-3805-254-20-2
DUMP BODY CONTROL LEVER AND LINKAGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
25. Dump body control
Pin (7) and
a. Put pin through clevis and dump body
lever arm (11)
clevis (6)
control lever arm (11).
b. Check that pin moves freely.
c. If pin does not move freely, take out pin
and turn clevis in or out to adjust.
d. Put pin back in.
26.
Pin (7) and new
a. Put in.
cotter pin (8)
b. Bend back ends using 6-inch long-nose
pliers (page 2-424).
27. Clevis (6)
Nut (5)
Tighten using 3/4-inch open-end wrench
and 8-inch slip-joint pliers.
TA244568
2-1371
