TM 5-3805-254-20-2
DUMP BODY CONTROL LEVER AND LINKAGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-424).
14.
All metal parts
Look for wear, bends, breaks, or
corrosion.
15.
All threaded parts
Look for damaged threads or rounded
heads.
INSTALLATION/ADJ USTM ENT
16 Control valve (1)
Rod (2)
Put in.
17 Rod (2)
Pin (3)
Put in using 8-inch slip-joint pliers.
18 Pin (3)
New cotter pin (4)
Put in and bend back ends using 6-inch long
nose pliers.
19. Rod (2)
Nut (5)
Screw on com pletely using 3/4-inch open-
end wrench and 8-inch slip-joint pliers.
20.
Clevis (6)
Screw on using two 8-inch slip-joint pliers.
Screw on number of threads counted
during removal.
21.
Center floorboard
Install (page 2-1262).
cover plate
22. Pin (7)
Cotter pin (8)
a. Using 6-inch long-nose pliers,
straighten ends and take out.
b. Get rid of.
23. Clevis (6)
Nut (5)
Using 3/4-inch open-end wrench and 8-
inch slip-joint pliers, loosen four turns.
24. Cab floor (9)
Dump body control
Have assistant put in and hold in neutral
lever (10)
position.
2-1370
