TM 5-3805-254-20-2
HYDRAULIC OIL RESERVOIR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
14. Two elbows (1)
Two nuts (2) and
Using 9/16-inch and 5/8-inch open-end
sight glass (3)
wrenches, unscrew and take out.
15. Sight glass (3)
Two nuts (2)
Take off.
16. Reservoir (4)
Two elbows (1)
Using 9/16-inch open-end wrench, un-
screw and take out.
17. Bushing (5)
Union (6)
Using 1 1/2-inch and 1 3/4-inch open-end
wrenches, unscrew and take out.
18. Elbow (7)
Bushing (5)
Using 1 3/4-inch open-end and 18-inch
pipe wrenches, unscrew and take out.
19. Filter housing (8)
Elbow (7)
Using 18-inch pipe wrench, unscrew and
take out.
20.
Two screws (9)
Using 3/4-inch open-end wrench, unscrew
and take out.
21. Reservoir (4)
Filter housing (8),
a. Using 5/16-inch hex key, unscrew and
four hex-head
take out.
screws (10), and
b. Get rid of ring.
ring (11)
c. Set filter housing aside for assembly.
22. Nipple (12
Filter housing
Using 18-inch pipe wrench, unscrew and
flange (13)
take off.
23. Reservoir (4)
Nipple (12)
Using 18-inch pipe wrench, unscrew and
take out.
CLEANING
WARNING
Improper cleaning methods and use of unauthorized cleaning liquids or solvents can injure personnel and
cause damage to equipment. Refer to TM 9-247.
2-1378
