TM 5-3805-254-20-2
HYDRAULIC OIL RESERVOIR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
30. Reservoir (1)
Two elbows (4)
a. Wrap pipe threads with antiseizing tape
(page 2-424).
b. Screw in and tighten using 9/16-inch
open-end wrench.
31. Sight glass (2)
Two nuts (5)
Put on.
32. Two elbows (4)
Sight glass (2) and
a. Put in place.
two nuts (5)
b. Screw in and tighten using 9/16-inch
and 5/8-inch open-end wrenches.
33. Reservoir (1)
Nipple (6)
a. Wrap pipe threads with antiseizing tape
(page 2-424).
b. Screw in and tighten using 18-inch pipe
wrench.
34. Nipple (6)
Filter housing
Screw on and tighten using 18-inch pipe
flange (7)
wrench.
35. Filter housing
Filter housing (8),
a. Put ring in place.
flange (7)
new ring (9), and
b. Screw in and tighten using 5/16-inch
four hex-head
hex key.
screws (10)
TA244574
2-1381
