TM 5-3805-254-34
6-39.
ADAPTER HOUSING REPAIR (Con’t).
c.
ASSEMBLY
1.
Using adapter housing (2) to hold first clutch
piston (1), place first clutch piston into adapter
housing until fully seated.
2.
Install 28 springs (5) into recesses of first clutch
piston (1).
3.
Install spring retainer (4) over springs (5) with f
flanges of spring retainer facing upward.
CAUTION
Failure to install push-on nuts to proper
location
may
result
in
damage
to
transmission. If installed too far, clutch
will have Improper clearance. If not
installed far enough, push-on nuts may
fall off.
4.
Using installer, install four new push-on nuts (3).
Press downward until spring retainer (4) flange
bottoms in recess of adapter housing (2).
5.
Remove first clutch piston (1) from adapter
housing (2).
TA703899
6-184
